.PAGE SIZE 10000
.RIGHT MARGIN 80
.AUTOPARAGRAPH
.C;EXAMPLE OF AN INTERACTIVE SESSION ON THE 

.C;ELECTRON MICROSCOPY AND MICROANALYSIS PUBLIC DOMAIN LIBRARY

.C;(EMMPDL)

.C;INTRODUCTION



	TO BEGIN A SESSION ON THE EMMPDL YOU MUST FIRST
ESTABLISH A TELEPHONE LINK BETWEEN YOUR COMPUTER
AND/OR TERMINAL AND THE EMMPDL COMPUTER SYTEM.  IF
YOU ARE OPERATING FROM A TERMINAL DIAL THE EMMPDL
COMPUTER MANUALLY. IF YOU ARE OPERATING FROM A
PERSONAL COMPUTER USING YOUR TELECOMMUNICATIONS
PACKAGE ON YOUR COMPUTER SYSTEM TO DIAL THE EMMPDL.
IN THE FOLLOWING EXAMPLE, WE WILL ASSUME THAT YOU
HAVE SUCCESSFULLY GOTTEN YOUR TERMINAL OR COMPUTER
TO DIAL THE EMMPDL PHONE NUMBER  (312-972-7919 ) AND
THAT THE TELEPHONE LINK  WAS SUCCESSFUL. TO ILLUSTRATE 
TYPICAL USER RESPONSES ALL INPUT ( I.E.  THE TEXT YOU
WOULD TYPE) WILL BE SHOWN IN UPPERCASE.   GENERAL COMMENTS
TO HELP DESCRIBE WHAT IS HAPPENING WILL ALSO APPEAR AS
UPPER CASE TEXT AS IN THIS INTRODUCTORY PARAGRAPH.



	A TYPICAL DIALUP OF THE SYSTEM USING A HAYES
COMPATIBLE MODEM IS AS FOLLOWS:


.NOFILL
>ATDT 312 972 7919
	
>CONNECT
	

	
THE REMAINDER OF THIS DOCUMENT IS AN EXAMPLE OF THE
TEXT THAT YOU WOULD OBSERVE ON YOUR TERMINAL SCREEN 
	




       Electron Microscopy Center VAX 11/785 System
	


Username: EMMPDL
Password: EMMPDL (NOTE: THE COMPUTER WILL NOT ECHO PASSWORDS)
	

               Welcome to the EMC VAX 11/785 - VMS Ver. 4.3
	
    Last interactive login on Tuesday,  5-AUG-1986 10:42
	
 

******************************************************************************
           Electron Microscopy and Microanalysis Public Domain Library
                                        of
            The ANL Electron Microscopy Center for Materials Research
                                       and
                    The Electron Microscopy Society of America
                            Version  8603100004-NJZ
******************************************************************************
                               Function:= LIBRARY LOGIN
	
  Enter your Lastname -----------------: ZALUZEC
	
  Enter your Firstname &/or Initials --: NESTOR J.
	
  Enter your SS or a Unique ID number -: 123456
	
  LOGIN ID : <ZALUZEC, NESTOR J., 123456>
	
  LOGIN ID is used for Messages and Accounting Purposes PLEASE Verify It
	
  LOGIN ID Correct [Y]?: Y
	

.FILL
	USER ZALUZEC  HAS JUST LOGGED INTO THE  EMMPDL PROGRAM.
THE SYSTEM HAS REQUESTED ACCOUNTING INFORMATION AND
AFTER SUCCESSFUL RESPONSES ARE OBTAINED, THE EMMPDL 
INTERACTIVE PROGRAM CONTINUES  IN ITS SEQUENCE.
.NOFILL
 
	
******************************************************************************
           Electron Microscopy and Microanalysis Public Domain Library
                            Function:= READ MESSAGES
******************************************************************************
                             7-AUG-1986 11:20:00.90
******************************************************************************
	
                   Are you an EMSA member? If not why not?
	
                     For Information on EMSA membership 
	
  Write to: EMSA, Box EMSA , Woods Hole, MA 02543 USA. (Tel: 617-540-7639) 
	

                            Meeting Announcements
                            ---------------------
                                Dates                    Location
-------------------------------------------------------------------------------
ICXOM-11  meeting               Aug.  4 - Aug. 8, 1986  London, Canada
EMSA/MAS  meeting               Aug. 10 - Aug. 16,1986  Albuquerque, N.M.,U.S.A.
XIth Int. Congress on EM        Aug. 31 - Sept. 7,1986  Kyoto, Japan
-------------------------------------------------------------------------------
	
                        End of System Wide Messages
           Checking for Messages to Current EMMPDL User under LoginID
------------------------------------------------------------------------------
	
>>>>>> Messages Complete Enter a <RET> to Proceed to Main Menu <<<<<<: 
.FILL
	

	THE SYSTEM HAS SUCCESSFULLY LOGGED IN AND FIRST BEGINS BY
TYPING OUT SYSTEM WIDE MESSAGES TO ALL EMMPDL USERS. IT
THEN CHECKS TO SEE IF THE LIBRARIAN HAS ANY SPECIFIC MESSAGE
FOR THE CURRENT LOGIN ID. THIS WOULD OCCUR, FOR EXAMPLE, IN
RESPONSE TO A MESSAGE SENT BY THE USER TO THE LIBRARIAN.
AN EXAMPLE OF THIS FUNCTION IS SHOWN LATER IN THIS DOCUMENT.
.NOFILL
	 

******************************************************************************
           Electron Microscopy and Microanalysis Public Domain Library
                            Function:= MAIN MENU
******************************************************************************
                             7-AUG-1986 11:20:22.51
******************************************************************************
       Option:                         Default:
------------------------------------------------------------------------------
       0 = Exit/Logoff
       1 = Help/Information
	
       2 = Set Defaults:
               Directory             <None>
               Filename              <None>
               Filetype              <None>
	
       3 = Directory Listing         <None:None.None>
       4 = Type File                 <None:None.None>
       5 = KERMIT Transfer of File   <None:None.None>
	
       6 = Submit  File to   SYSTEM Library
       7 = Send Message to   SYSTEM Librarian
       8 = Read Message from SYSTEM Librarian
	
 Select Option by Entering Number or Typing Option: DIR
	
.FILL
	

	AFTER TYPING OUT ALL SYSTEM WIDE MESSAGES THE EMMPDL
PROGRAM GOES TO THE MAIN MENU . THE USER  NEXT SELECTS  THE
FUNCTION WHICH HE OR SHE WISHES TO PERFORM IN THIS EXAMPLE
THE USER  REQUESTS TO OBTAIN A DIRECTORY OF THE AVAILABLE
INFORMATION IN THE EMMPDL.
.NOFILL 
	
******************************************************************************
           Electron Microscopy and Microanalysis Public Domain Library
                            Function:= DIRECTORY
******************************************************************************
                             7-AUG-1986 11:20:47.65
******************************************************************************
	
            Current DIRECTORY             : <None:None.None>
             Change DIRECTORY [<RET>=Okay]: 
******************************************************************************
	
      ------------------------------------------------
     The Following Directories Are Currently Defined:
     ------------------------------------------------
      CTEM = Conventional Transmission Electron Microscopy
      STEM = Scanning Transmission Electron Microscopy
      HREM = High Resolution Electron Microscopy 
      HVEM = High Voltage Electron Microscopy
      SEM  = Scanning Electron Microscopy
	
      CBED = Convergent Beam Electron Diffraction
      SAED = Selected Area Electron Diffraction
	
      XEDS = X-ray Energy Dispersive Spectroscopy
      EELS = Electron Energy Loss Spectroscopy
      AES  = Auger Electron Spectroscopy
	
      IMAG = Image Analysis
      GRPH = Graphics
	
      INFO = Hardware and Software Information/Hints
      MISC = Miscellaneous or Unclassified
      MENU = Return to Main Menu
	
        Select Desired Directory: GRPH
	
.FILL

	THE USER HAS DECIDED TO ACCESS THE GRAPHICS DIRECTORY.
THE SYSTEM WILL NOW PRINT OUT A DIRECTORY OF ALL FILES
UNDER THIS TOPIC.  NOTE THAT THE INFORMATION IS CODED
BY SUBJECT MATTER AND THE USER MUST SELECT THE TOPIC
OF INTEREST.
.NOFILL
	
------------------------------------------------------------------------------
	
Directory EMC$DISK:[EMMPDL.GRPH]
	
NGRAPH.ABS;6              3   5-AUG-1986 22:50  (RWED,RWED,RWED,RWED)
NGRAPH.DOC;4              8   5-AUG-1986 23:07  (RWED,RWED,RWED,RWED)
NGRAPH.SRC;2            163   5-AUG-1986 22:50  (RWED,RWED,RWED,RWED)
NGTEST.ABS;2              2   5-AUG-1986 23:09  (RWED,RWED,RWED,RWED)
NGTEST.DOC;2              4   5-AUG-1986 23:15  (RWED,RWED,RWED,RWED)
NGTEST.SRC;2             13   5-AUG-1986 23:21  (RWED,RWED,RWED,RWED)
------------------------------------------------------------------------------
	
>>>>>> Output Complete Enter a <RET> to Return to Main Menu <<<<<<: 
.FILL
	
	THE SYSTEM HAS JUST TYPED OUT A LISTING OF ALL FILES
IN THE GRAPHICS DIRECTORY. NOTE THAT THERE ARE 3 FILE
TYPES (ABS=ABSTRACT, DOC=DOCUMENTATION, SRC=SOURCE CODE)
AFTER ALLOWING THE USER TO READ THE DIRECTORY THE SYSTEM
WILL RETURN TO THE MAIN MENU, WHERE THE USER MUST SELECT
THE NEXT FUNCTION DESIRED.  
.NOFILL
	 

******************************************************************************
           Electron Microscopy and Microanalysis Public Domain Library
                            Function:= MAIN MENU
******************************************************************************
                             7-AUG-1986 11:21:09.27
******************************************************************************
       Option:                         Default:
------------------------------------------------------------------------------
       0 = Exit/Logoff
       1 = Help/Information
       2 = Set Defaults:
               Directory             <GRPH>
               Filename              <None>
               Filetype              <None>
	
       3 = Directory Listing         <GRPH:None.None>
       4 = Type File                 <GRPH:None.None>
       5 = KERMIT Transfer of File   <GRPH:None.None>
	
       6 = Submit  File to   SYSTEM Library
       7 = Send Message to   SYSTEM Librarian
       8 = Read Message from SYSTEM Librarian

	
 Select Option by Entering Number or Typing Option: SET
	
.FILL
	
	THE USER HAS DECIDED TO SET THE DEFAULTS IN ORDER TO 
LOOK AT A SPECIFIC FILE(S). NOTE THAT UNDER THE
SET DEFAULTS OPTION THE DIRECTORY HAS NOW BEEN SET TO
GRAPHICS.  THE FILENAME AND FILETYPE ARE STILL "NONE"
OR UNDEFINED.

.NOFILL
	
******************************************************************************
           Electron Microscopy and Microanalysis Public Domain Library
                            Function:= SET DEFAULT
******************************************************************************
                             7-AUG-1986 11:21:17.28
******************************************************************************
	
     ------------------------------------------------
     The Following Directories Are Currently Defined:
     ------------------------------------------------
      CTEM = Conventional Transmission Electron Microscopy
      STEM = Scanning Transmission Electron Microscopy
      HREM = High Resolution Electron Microscopy 
      HVEM = High Voltage Electron Microscopy
      SEM  = Scanning Electron Microscopy
	
      CBED = Convergent Beam Electron Diffraction
      SAED = Selected Area Electron Diffraction
	
      XEDS = X-ray Energy Dispersive Spectroscopy
      EELS = Electron Energy Loss Spectroscopy
      AES  = Auger Electron Spectroscopy
	
      IMAG = Image Analysis
      GRPH = Graphics
	
      INFO = Hardware and Software Information/Hints
      MISC = Miscellaneous or Unclassified
	
           Current DIRECTORY             : <GRPH>
               New DIRECTORY [<RET>=Okay]: 
	
	
     -------------------------------------------------
     The Following FILENAMES Are Currently Recognized:
     -------------------------------------------------
	
       32 Alphanumeric Characters is maximum length
                  no other limitations exist
	
               * = All FILETYPES (Wild Carding)
	 

           Current FILENAME              : <None>
               New FILENAME [<RET>= Okay]: *
	 
     -------------------------------------------------
     The Following FILETYPES Are Currently Recognized:
     -------------------------------------------------
	
           ABS = Library File Abstract
           DOC = Library File Documentation
           SRC = Library File Source Code
	
           DAT = Library File Spectral Data
           TBL = Library File Tabulation of Physical Constants
	
             * = All FILETYPES (Wild Carding)
	
           Current FILETYPE              : <None>
               New FILETYPE [<RET>=Okay]?: ABS
	
------------------------------------------------------------------------------
.FILL
	 

	THE USER HAS DECIDED TO RETAIN THE DEFAULT DIRECTORY OF
GRAPHICS, HAS SELECTED A WILDCARDING (*) OF FILENAMES,
AND HAS CHOZEN TO SELECT ONLY FILETYPES OF THE FORM ABS.
.NOFILL
	
******************************************************************************
           Electron Microscopy and Microanalysis Public Domain Library
                            Function:= MAIN MENU
******************************************************************************
                             7-AUG-1986 11:21:42.38
******************************************************************************
       Option:                         Default:
------------------------------------------------------------------------------
       0 = Exit/Logoff
       1 = Help/Information
       2 = Set Defaults:
               Directory             <GRPH>
               Filename              <*>
               Filetype              <ABS>
	
       3 = Directory Listing         <GRPH:*.ABS>
       4 = Type File                 <GRPH:*.ABS>
       5 = KERMIT Transfer of File   <GRPH:*.ABS>
	
       6 = Submit  File to   SYSTEM Library
       7 = Send Message to   SYSTEM Librarian
       8 = Read Message from SYSTEM Librarian
	
 Select Option by Entering Number or Typing Option: TYPE
	
.FILL

	
	NOW THAT THE DEFAULTS ARE PROPERLY SELECTED THE USER
WISHES TO TYPE OUT ALL GRAPHICS FILES ABSTRACTS AND
VIEW THEM ON THE SCREEN.  THIS ALLOWS THE USER TO DETERMINE
IF THE INFORMATION IN THESE FILES IS OF INTEREST. NOTE:
IF YOUR PERSONAL COMPUTER IS NOW SET INTO THE "CAPTURE TEXT"
MODE ALL INFORMATION TYPED ON THE SCREEN WILL BE SAVED INTO
YOUR SYSTEM.  THIS REPRESENTS ONE POSSIBLE MODE OF FILE 
TRANSFER FROM THE EMMPDL TO YOUR PC.
.NOFILL
 
	
******************************************************************************
           Electron Microscopy and Microanalysis Public Domain Library
                            Function:= TYPE FILE
******************************************************************************
                             7-AUG-1986 11:21:53.62
******************************************************************************
	
             Current DEFAULT     : <GRPH:*.ABS> 
             Change Default [N]  : 
	
EMC$DISK:[EMMPDL.GRPH]NGRAPH.ABS;6
	
Title                  :NGRAPH (Subroutine Library) - Abstract
Keywords               :GRAPHICS
Computer               :DEC VAX 11/730-785, DEC PDP 11/2-11/73
Operating System       :VAXVMS, RT-11
Programming Language   :Fortran IV
Hardware Requirements  :TEKTRONICS 4010 terminal or an EQUIVALENT emulator
Author(s)              :Nestor J. Zaluzec
Correspondence Address :Argonne Nat. Lab, Electron Microscopy Center, Bldg  212
                       :Materials Science Division, Argonne, Illinois 60439, USA
Abstract: 
This subroutine  library  provides  graphics  functions  for  Tektronics  4010-1
terminals   and/or  their  emulators.   The  current  terminals  supported  are:
Tektronics 4010-1,4014-1, Lear Siegler ADM-3,ADM-5 (with  Retrographics  RG-512)
Peritek VCG-512 bit map color graphics, Tektronics 4027, HP 7470A/7475A plotters
DEC LA100/LA50 printers, Intecolor VT-100 with TEK  4010-1,4014-1,  4027  modes,
DEC  VT-200  with  4010-1,4014-1  mode,  Tektronics  4105/4107 with VT-100 mode,
Plessey VT-100/TEK 4010-1, Espirit VT-100/TEK 4010-1,  Tektronics  4695  Copier.
The  computer  program NGTEST is a fortran demonstration program which exercises
this graphics package.  The purpose of this graphics library  is  to  provide  a
standard  set  of  routine for producing x-y plots of XEDS and EELS data for the
analysis programs NEDS, NELS and graphics for plotting CBED patterns.
		
	
EMC$DISK:[EMMPDL.GRPH]NGTEST.ABS;2
	
	
Title                  :NGTEST (Demonstration Program) - Abstract
Keywords               :GRAPHICS
Computer               :DEC VAX 11/730-785, DEC PDP 11/2-11/73
Operating System       :VAXVMS, RT-11
Programming Language   :Fortran IV
Hardware Requirements  :TEKTRONICS 4010 terminal or an EQUIVALENT emulator
Author(s)              :Nestor J. Zaluzec
Correspondence Address :Argonne Nat. Lab, Electron Microscopy Center, Bldg  212
                       :Materials Science Division, Argonne, Illinois 60439, USA
Abstract: 
The computer program NGTEST is a fortran demonstration program  which  exercises
the  NGRAPH library package.  It demonstrates the symbol plotting, x-y plotting,
vector plotting, hardcopy output and cursor control subroutines available in the
package.  It requires that a file TERMIN.DAT exist on the default storage device
named DAT:.  A copy of the file TERMIN.dat can be found in the documentation  of
the NGRAPH routines.
------------------------------------------------------------------------------
	 

>>>>>> Output Complete Enter a <RET> to Return to Main Menu <<<<<<: 
	
.FILL
	



	SINCE ONLY TWO FILES OF THE TYPE ABS EXISTED IN THE GRAPHICS
DIRECTORY THEY ARE THE ONLY ONES DISPLAYED ON THE SCREEN.
AFTER TYPING OUT THE FILES THE SYSTEM RETURNS TO THE MAIN
MENU.

.NOFILL 
	
******************************************************************************
           Electron Microscopy and Microanalysis Public Domain Library
                            Function:= MAIN MENU
******************************************************************************
                             7-AUG-1986 11:22:14.96
******************************************************************************
       Option:                         Default:
------------------------------------------------------------------------------
       0 = Exit/Logoff
       1 = Help/Information
       2 = Set Defaults:
               Directory             <GRPH>
               Filename              <*>
               Filetype              <ABS>
	
       3 = Directory Listing         <GRPH:*.ABS>
       4 = Type File                 <GRPH:*.ABS>
       5 = KERMIT Transfer of File   <GRPH:*.ABS>
	
       6 = Submit  File to   SYSTEM Library
       7 = Send Message to   SYSTEM Librarian
       8 = Read Message from SYSTEM Librarian
	

 Select Option by Entering Number or Typing Option: SEND
	

.FILL
	
	THE USER HAS DECIDED TO SEND A MESSAGE TO THE LIBRARIAN
.NOFILL 
	
******************************************************************************
           Electron Microscopy and Microanalysis Public Domain Library
                            Function:= SEND MESSAGE 
******************************************************************************
                             7-AUG-1986 11:22:33.45
******************************************************************************
	 
------------------------------------------------------------------------------
	
  NOTE: Maximum message Length is 20 lines of text. End each line with a <RET>.
         To SEND the message enter a <RET> at the begining of a new line.
------------------------------------------------------------------------------
1: THIS IS AN EXAMPLE OF SENDING A MESSAGE TO THE SYSTEM LIBRARIAN
2: THE MESSAGE AUTOMATICALLY CONTAINS YOUR LOGINID AND IS FORWARDED
3: TO THE LIBRARIAN WHEN YOU COMPLETE THE LAST LINE
4: THE LAST LINE OF THE MESSAGE MUST BE BLANK
5: 
------------------------------------------------------------------------------
	 
	
>>>>>> Messages Complete Enter a <RET> to Proceed to Main Menu <<<<<<: 
	
.FILL

	AT THE END OF SENDING THE MESSAGE THE SYSTEM RETURNS TO 
THE MAIN MENU.
.NOFILL
	
 

******************************************************************************
           Electron Microscopy and Microanalysis Public Domain Library
                            Function:= MAIN MENU
******************************************************************************
                             7-AUG-1986 11:24:25.61
******************************************************************************
       Option:                         Default:
------------------------------------------------------------------------------
       0 = Exit/Logoff
       1 = Help/Information
       2 = Set Defaults:
               Directory             <GRPH>
               Filename              <*>
               Filetype              <ABS>
	
       3 = Directory Listing         <GRPH:*.ABS>
       4 = Type File                 <GRPH:*.ABS>
       5 = KERMIT Transfer of File   <GRPH:*.ABS>
	
       6 = Submit  File to   SYSTEM Library
       7 = Send Message to   SYSTEM Librarian
       8 = Read Message from SYSTEM Librarian
	
 Select Option by Entering Number or Typing Option: EXIT
	
.FILL

	THE USER IS FINISHED AND EXITS THE EMMPDL.
.NOFILL
	
	

******************************************************************************

	
                           A System EXIT has occured 
                              LOGOFF in Progress
	
                  Deleting Messages Addressed to Current LOGIN ID 
	
  EMMPDL       logged out at  7-AUG-1986 11:24:56.21
	
  Accounting information:
  Buffered I/O count:          659      Peak working set size:   319
  Direct I/O count:            253      Peak page file size:     862
  Page faults:                2577      Mounted volumes:           0
  Charged CPU time:     0 00:00:12.95   Elapsed time:     0 00:05:43.16
	
.FILL


	THIS  CONCLUDES  THE  EXAMPLE  OF  AN  EMMPDL  SESSION